The TriggerBeam Pro Kit is a long range infra red beam device. The kit works by triggering a camera when the infrared beam is broken. The infrared beam has a range of 30m when used in darkness and at least 20m during daylight. The TriggerScout PIR sensor can be connected directly to a camera using the appropriate cable, a 3.5mm to 2.5mm jack cable is supplied (see below for camera compatibility). The sensor can also be connected to the MCT-1 control unit (not included) which allows the user to control the sensitivity of the sensors and delay the trigger of the connected camera. The TriggerBeam Pro can also support the camera’s single exposures or continuous shooting modes, dependent on the camera’s settings.
The infrared sensor and receiver have a standard 1/4" fitting for mounting, and the kit includes two stakepods, which can be deployed in soft ground.
1 x infrared sensor
1 x infrared receiver
2 x stakepod
2 x weather proof cover
1 x 3m cable 3.5mm to 2.5mm
1 x jack adator 2.5 to 3.5mm
1 x 2 degrees baffle
The provided camera cable will work with the following cameras:
Canon: EOS 30, EOS 33, EOS 50E, EOS 300, EOS 300V, EOS 300D, EOS 350D, EOS 3000, EOS 50, EOS 500, EOS 55, EOS 500N, EOS 300X, EOS Kiss, EOS New Kiss, EOS Kiss 7, EOS Kiss III, EOS 7, EOS 7s , EOS 400D, EOS Digital Rebel, EOS Digital Rebel X, EOS Digital Rebel XSi, EOS KISS X2, EOS 450D, EOS Digital Rebel XTi, Kiss Digital, Kiss Digital N, ELAN 7N, ELAN II, ELAN DATE, ELAN 7, ELAN 7NE, ELAN 7N, ELAN IIE, Rebel 2000, Rebel G, Rebel T2, Rebel Ti, Rebel X, Rebel XS, EOS 1000D, EOS 500D, Rebel T1i, EOS 550D, Rebel T2i, G10, G11, G12, 60D, 600D, Rebel T3i, Kiss X5, 1100D, Rebel T3
Pentax: K100D, K110D, K10D, *ist DS2, K200D, K20D K7, *ist D, *ist DS, *ist, *ist DL, MZ-6, ZX-L, MZ-, *ist, DL2, K5
Samsung: GX-1L, GX-1S, GX-10, GX-20, NX10, NX100, NX5
Contax: 645, N, N1, NX, N Digital
For any other camera you will need a dedicated adapter cable.
Range: darkness 30 meter, bright ambient light 20 meters approx.
Trigger Time: minimum beam break to trigger time 20 ms (1/50 Sec.)
Trigger delay time: up top 10 ms (1/100 Sec.)
Infrared transmitter beam: 10 degrees
Wavelength: 950 nm
Trigger Outputs: direct to camera or via Triggersmart control unit
Power: Transmitter 3 x AAA batteries, receiver 2 x AAA or self-powered
Operation time: batteries up to 60 hours
There are currently no reviews for this product. Be the first to review this product!