This specially designed car mount for the Echo Meter Touch 2 family makes mobile transect surveys even easier. This mount attaches to your car using a pump-action mounting cup design, allowing for quick attachment to the vehicle. A lift tab ensures easy and quick release. The bracket is coated with a durable epoxy powder finish which will tolerate wet and cold weather. The mount can be attached to any horizontal, flat, shiny, nonporous surface, including glass. The Echo Meter Touch 2 module slots into a secure holding box, allowing the module to be pointed upwards to the sky. The module can be connected to your phone/tablet using long extension cables (cables not included), allowing you to keep your phone/tablet dry inside the car. The cables can be fitted to the module through a small hole at the base of the holding box (Echo Meter Touch 2 module not included).
Compatible with the Android and iOS versions of the Echo Meter Touch 2 and Echo Meter Touch 2 Pro. The Echo Meter functions at speeds at or below 20mph (32 km/h).
If connecting to an Android device, you will need an extension cable. If your device has a USB-C connector, it is best to use an adapter stub and then use a USB-C extender cable (female USB-C to male USB-C). The manufacturers have found only one female micro-USB to male USB-C adapter stub that works with EMT2. It is available at Amazon in the UK. Search for "USB C to Micro USB Adapter, ARKTEK Type C (male) to Micro USB (female)". If your device has a micro-USB connector, then you will need a micro-USB extension cable (female micro-USB to male micro-USB).
If connecting to an iOS device, you will need an extension cable. The manufacturers recommend the Cable Jive brand of lightning extender cables. They are available in 2 and 6-foot lengths and can be daisy chained.
For installation and mounting instructions, please refer to this guide.