The TriggerSmart Kit uses sensors to trigger a camera based on sound, light intensity or movement. The TriggerSmart MCT-1 controller allows the user to adjust the sensitivity of the sensors, the delay between trigger and camera activation, and the number of photos taken when the camera is in continuous shoot mode.
The multi-mode sensors work in three ways, making use of the fact that one is a transmitter and one is a receiver:
The kit also includes two standard 1/4" tripods to mount the sensors, two control cables to link the sensors to the control box, one trigger cable which can be used to connect an SLR camera (see below for camera compatibility) and a 2 degree baffle that will narrow the sensitivity cone of the infrared transmitter. A Wildlife Kit is also available to use in conjunction with the TriggerSmart Kit to make it more suitable for wildlife photography.
1 x infrared transmitter and sound sensor
1 x infrared receiver and light intensity sensor
2 x tripods
2 x control cables
1 x 3m cable 3.5mm to 2.5mm
1 x 2 degrees baffle
The provided camera cable will work with the following cameras:
Canon: EOS 30, EOS 33, EOS 50E, EOS 300, EOS 300V, EOS 300D, EOS 350D, EOS 3000, EOS 50, EOS 500, EOS 55, EOS 500N, EOS 300X, EOS Kiss, EOS New Kiss, EOS Kiss 7, EOS Kiss III, EOS 7, EOS 7s , EOS 400D, EOS Digital Rebel, EOS Digital Rebel X, EOS Digital Rebel XSi, EOS KISS X2, EOS 450D, EOS Digital Rebel XTi, Kiss Digital, Kiss Digital N, ELAN 7N, ELAN II, ELAN DATE, ELAN 7, ELAN 7NE, ELAN 7N, ELAN IIE, Rebel 2000, Rebel G, Rebel T2, Rebel Ti, Rebel X, Rebel XS, EOS 1000D, EOS 500D, Rebel T1i, EOS 550D, Rebel T2i, G10, G11, G12, 60D, 600D, Rebel T3i, Kiss X5, 1100D, Rebel T3
Pentax: K100D, K110D, K10D, *ist DS2, K200D, K20D K7, *ist D, *ist DS, *ist, *ist DL, MZ-6, ZX-L, MZ-, *ist, DL2, K5
Samsung: GX-1L, GX-1S, GX-10, GX-20, NX10, NX100, NX5
Contax: 645, N, N1, NX, N Digital
For any other camera you will need a dedicated adapter cable.
* Range: 20cm to 2m
* Infrared transmitter beam: 8 degrees
* Trigger time: selectable 5ms - 5 secs
* Delay time: short delay 1ms-100ms or long delay 1/10-10 secs
* Flash sensor: range 1 to 1500 lumens. Sensitivity 10 lumens
* Sound response: microphone sensitivity frequency response 50 to 5000 Hz
* Trigger Outputs: via Triggersmart control unit
* Power: Transmitter 4 x AA batteries or mains (mains adapter sold separately)
* Weight: MCT-1 Controller 325g. Sensors 43g. Tripods 33g. Kit 950g
* Size: Controller - (W)19cm x (D)14cm x (H)5cm. Sensors (W)7.5cm x (D)5cm x (H)2.6cm
* Waterproofing: IP53
There are currently no reviews for this product. Be the first to review this product!