TriggerSmart MK2 Wireless Multi Sensor

About this product

The wireless Multi Sensor (WMS-1) is designed to be an additional sensor or replacement unit for use with the TriggerSmart MK2 camera trigger system and communicates with the Digital Controller (DC-2) via the built-in wireless link and includes light, sound and infrared beam sensors in one compact unit. In addition there is an auxiliary input enabling the use of other devices such as Triggerbeam,Triggerscout or many other sensors.  The sensor has 16 programmable channels and an action delay of less than 30ms. It is powered by x2 CR2032 batteries (not included).

Specification

Sensor Linking                 - Via 433Mhz wireless link to controller

Wireless Channels           - 16 programmable channels

Activation Delay               - < 30ms

IR Beam                           - Range - 20 cm to - 2m. Wavelength 850 nm.

Flash Sensor                    - Range 1 to 1500 lumens. Sensitivity 10 lumens.

Sound Response              - Microphone sensitivity - frequency response 50 to 5000 Hz at 3 Db.

Auxillary Input                   - Low to activate.

Power Requirements        - x2 CR2032 batteries (not included).

Power Consumption         - About 3mA on standby. SIZE - (W)7.5cm x (D)5cm x (H)2.6cm.

Sensor Mounting              - ¼ inch UNC thread (standard tripod thread).

Weight                              - 70g

Waterproofing                   - IP54.

Temperature                     - 0 to 35˚C. (operating). -10 to +500˚C. (non- operating).

Shock                                - 12 Newtons.

Customer Reviews